Skip to content
BerwickCompanies Request a site visit

Wired right,inspected once,across Medina County.

Berwick Companies is a general electrical contractor based at Chippewa Lake, Ohio. Panels, standby generators, farm service and remodel wiring for homes, farms and small businesses, each quoted individually after a free walkthrough.

Now scheduling October walkthroughs in Medina County

Electrician in a yellow hard hat installing wiring
New service rough-in
Open electrical panel with circuit breakers and neatly routed wiring
Panel replacement
Farm with a barn and silo in the countryside
Farm service

Trusted by farms, shops and homeowners across Northeast Ohio

  • Hostetler Family Farm
  • Rittman Machine Works
  • Westfield Lakeside Marina
  • Brunswick Family Dental
  • Seville Feed & Supply
  • Sharon Center Animal Clinic

Nine kinds of work we do every week

From farmhouses outside Lodi to new builds in Brunswick, every job starts the same way: we come out, look at what's actually there, and write you a quote for that job alone. No menu prices, no one-size packages.

Electrician testing a residential electrical panel with a multimeter

Panel upgrades & service changes

A lot of homes around Medina and Wadsworth still run on 100-amp service, and some still have Federal Pacific or Zinsco panels behind the basement stairs. We size the new service with a real load calculation, set the meter base, and coordinate the disconnect and reconnect with Ohio Edison or your co-op so you're not left in the dark longer than a few hours.

  • Typical timeline: 1–2 days on site
  • Includes: Load calculation, permit, inspection & utility coordination
  • Price: quoted individually after a free walkthrough
Ask about this job

Standby generators & transfer switches

Ice storms and summer windstorms knock out lines across rural Medina County every year. We install whole-home standby units and automatic transfer switches, or a manual interlock for a portable generator, so the sump pump, furnace and well keep running.

  • Typical timeline: 2–3 days incl. gas tie-in
  • Includes: Sized to your must-run list
  • Price: quoted individually after a free walkthrough
Ask about this job
Red wooden barn under a blue sky in the countryside

Farm, barn & outbuilding power

Underground feeders to pole barns and workshops, well-pump circuits, livestock-safe wiring that holds up to dust and moisture, and lighting for the long winter chores. We work with the dairy, horse and hobby farms between Lodi, Seville and Homerville and plan runs around fields, fences and future buildings.

  • Typical timeline: 2–5 days depending on trenching
  • Includes: Wet- and dust-rated materials
  • Price: quoted individually after a free walkthrough
Ask about this job

Lake-home & dock wiring

Our shop sits a few minutes from Chippewa Lake, so we know what water, frost heave and boat lifts do to a circuit. We wire docks, lifts and shoreline lighting with proper GFCI protection and bonding, and fix the tired cottage wiring many lake homes inherited.

  • Typical timeline: 1–2 days
  • Includes: GFCI protection & bonding checked
  • Price: quoted individually after a free walkthrough
Ask about this job

Remodels, additions & new builds

Kitchens, finished basements, in-law suites and full additions from rough-in through final trim. We walk the plans with you and your builder early, so outlets, lighting and dedicated circuits land where you'll actually use them.

  • Typical timeline: Scheduled around your builder
  • Includes: Rough-in to final trim
  • Price: quoted individually after a free walkthrough
Ask about this job

Lighting, inside and out

Recessed and under-cabinet lighting, fixture swaps in high ceilings, driveway pole lights for long rural lanes, and landscape lighting that survives an Ohio winter. We talk through color temperature and dimming before anything gets cut into your drywall.

  • Typical timeline: Half day to 2 days
  • Includes: LED retrofits & new layouts
  • Price: quoted individually after a free walkthrough
Ask about this job
Electric vehicle charger cable plugged into a car

EV chargers & garage circuits

Level 2 chargers in attached and detached garages, with a load check first so the new circuit doesn't overload older service. If your panel is close to full, we'll lay out the options honestly, from load management to a service upgrade, and let you choose.

  • Typical timeline: Usually 1 day
  • Includes: Load check before install
  • Price: quoted individually after a free walkthrough
Ask about this job
Electrician in a yellow hard hat holding a tool on a job site

Light commercial & shop work

Tenant fit-outs, three-phase machine hookups, shop lighting and code corrections for small businesses along Route 18, Route 3 and in Wadsworth, Medina and Rittman. We schedule around your hours so the doors stay open.

  • Typical timeline: Scoped per project
  • Includes: Three-phase & after-hours available
  • Price: quoted individually after a free walkthrough
Ask about this job

Troubleshooting & safety inspections

Breakers that keep tripping, warm outlets, flickering lights, or a home inspection report that flagged aluminum branch wiring or knob-and-tube. We find the cause, explain it in plain words and give you a written list of what's urgent and what can wait.

  • Typical timeline: Same or next-day for urgent calls
  • Includes: Written findings you can keep
  • Price: quoted individually after a free walkthrough
Ask about this job

Why there are no prices on this page. A 200-amp upgrade in a 1950s ranch and one in a two-year-old colonial can differ by days of work. We'd rather quote your job than guess at someone else's, and the walkthrough is free.

Get my individual quote
Electrical outlet opened up to show the wiring behind it
We open things up and look before we put a number on paper.

What happens after you call

Five steps, the same on a single circuit or a whole farm.

  1. Step 1: Call or write to us

    Tell us what's going on, a few photos of your panel help. Ted or the office calls you back the same business day.

    Same day
  2. Step 2: Free walkthrough on site

    We look at the panel, the service drop, the run lengths and anything the last guy left behind. Most visits in Medina County happen within 3–5 business days.

    About 45 minutes
  3. Step 3: Written, itemized quote

    You get a price for your job, with materials and scope spelled out. The number we quote is the number you pay, and nothing gets added without your signature.

    Within 2 business days
  4. Step 4: Permit, work, inspection

    We pull the permit with the county or city building department, do the work, and meet the inspector. For service changes we handle the utility scheduling too.

    Per project
  5. Step 5: Handover & labeled panel

    We walk you through what changed and leave a typed panel directory, so the next time a breaker trips you know exactly which one it is.

    Final day

Seven days after we finish, the work is still ours.

If anything we installed isn't right, tell us within 7 days and we come back to address it. Full terms are in our Refund Policy.

Talk to Ted

Berwick vs. the cash side job

The cheapest quote in the township often skips the parts you can't see. Here's what's different when a contractor does it by the book.

With BerwickCompanies

  • Permit and county inspection on every job that needs oneYour insurer and your future buyer will ask.
  • Load calculation before any upgrade or EV chargerSized for what you run, not a guess.
  • Written, itemized quote for your specific jobNothing added without your signature.
  • Utility coordination for service changesWe schedule the disconnect so you don't have to.
  • 7-day follow-up and a typed panel directoryYou know what every breaker does.

With a typical side job

  • Often no permit, so no inspectionProblems surface at resale or after a fire.
  • Breaker sizes picked by feelNuisance trips, or worse, none when it matters.
  • A verbal number that grows once the walls are openHard to hold anyone to it.
  • You call the utility yourselfAnd wait on hold between their visits.
  • Handwritten labels, if anyGuesswork every time a breaker trips.

Before you call

The questions we hear most often on the first phone call, answered straight.

Because no two electrical jobs around here are the same. The age of the house, how far the panel sits from the meter, whether we can fish walls or need to trench, all of it changes the work. We walk your site for free and give you a written, itemized quote for your job. You can see everything we do on our services page.

Yes, on every job that requires one. We file with the Medina County Building Department or your city's building office, schedule the inspection, and meet the inspector on site. For service changes we also coordinate the disconnect and reconnect with Ohio Edison or your electric co-op.

Your address, a short description of the job, and if you can, a photo of your panel with the door open and the label visible. For generators, a list of what must keep running. For farms, which buildings need power and roughly where they sit.

All three. Roughly half our work is residential, and the rest is split between farms and outbuildings and small commercial spaces like shops, offices and clinics.

Walkthroughs across Medina County are usually booked within 3–5 business days. If you have no power, a burning smell, or storm damage to your service, call rather than email and we'll get someone out the same or next day whenever a crew is free.

Tell us within 7 days and we come back to look at it and put it right. The full terms are in our Refund Policy.

Most of our work is in Medina County: Chippewa Lake, Medina, Wadsworth, Seville, Lodi, Brunswick and the townships around them. We also regularly work in Norton, Barberton, Rittman, Wooster and Strongsville. For larger projects we'll go farther, just ask.

Wooden barn on a green field under a blue sky in rural Ohio

A Chippewa Lake shop that answers its own phone

Berwick Companies started the way most good trade outfits around here do: one electrician, one truck, and neighbors who kept passing his number along. Ted Philput still runs the business from Hunter Drive, a few minutes from the lake, and he still walks every job before a price goes on paper.

Northeast Ohio is hard on wiring. Frost pushes on buried feeders, lake air works on dock boxes, and plenty of farmhouses between Seville and Homerville were wired for a few lamps and a radio. We see it all, and we'd rather fix the cause than patch the symptom.

That's also why we don't sell packages. Every building has its own history, so every quote is written for that building alone, with the scope, materials and schedule spelled out before any work starts.

We stay small on purpose. When you call, you talk to the people who will actually be in your basement, barn or shop, not a call center two states away.

1,400+jobs wired and inspected
4Ohio counties served regularly
92%of work from repeat clients and referrals
4.9average rating from 126 reviews

Who you'll actually work with

Ted PhilputOwner & lead electricianWalks every site himself and writes every quote. Your first call goes to him.

Nate BrennerJourneyman electricianRuns the generator and farm crews. Knows every back road between Lodi and Rittman.

Colleen MarshScheduling & permitsKeeps the calendar honest and the permit paperwork moving with the county.

What neighbors say after the inspector leaves

A few words from farms, lake homes and shops we've worked for across Medina, Wayne and Summit counties.

They ran new underground service to our milking barn and two pole buildings, and planned it around the field we'll plant next spring. Ted explained every line of the quote at our kitchen table, and the final bill matched it to the dollar.

Mark HostetlerOwner, Hostetler Family Farm, Lodi Verified client

Our dock and boat lift had been tripping for two summers. They found a corroded junction box under the deck, rewired it properly and showed me the photos. Not a single trip since.

Karen DiMarcoHomeowner, Chippewa Lake Verified client

Two new CNC machines needed three-phase drops. Berwick did the work over a weekend so we didn't lose a shift, and the inspection passed the first time.

Greg SzaboFacilities lead, Rittman Machine Works Verified client

After the ice storm left us without power for three days, we had them put in a standby generator. Clear quote, clean install, and Colleen kept us posted on every date.

Amanda BrooksHomeowner, Medina Verified client
Book a free walkthrough